MISSION & VALUES
SIDE BY SIDE
DOGA has gained a very interesting ATV project with the brand BRP.
Maverick is the ATV model of the CAN-AM product line, a new model that breaks the rule book in this vehicle typology. In addition to being fully customizable with an unmistakable sporty design, it is a beast in the off-road world, perfect for mastering any obstacle without taking any shortcuts.
DOGA has been responsible for supplying the windshield wiper and washer system for this demanding machine.
The windshield wiper system is composed of a motor type 317 with a sweeping angle of 130 °, a 400 mm type 120.89 wiper arm, including a spray nozzle, and a 558 mm flat wiper blade type 130.
The windscreen washer system includes a 2.1 L washer tank with a filler neck.
The estimated production volume of the vehicle is 1,000 units per year.
LEMKEN AZURIT FOR SINGLE-SEED DRILLING
Those machines were presented during the 2013 Agritechnica, venturing into the single-seed drilling. Now, the pre-production Azurit machine which stands out through the novel DeltaRow placement system provide a 70% more surface area for plant growth and guarantee better access to water, light and nutrients.
Azurit stands out for the incorporation of two twin rows of seeds moving away from the traditional approach where the seeds are placed in single rows. Is also available with a tramline mechanism, which is an essential prerequisite for spreading farmyard manure optimally on crops using tyres that help preserve the soil. The desired stocking density is maintained even with tramlines. Moreover, the Azurit allows maize, soya beans, sunflowers and rapeseed to be sown with great precision and efficiency at forward speeds of up to 15 km/h and is available with 4, 6 or 8 rows and 50 cm or 75 cm distance between rows.
DOGA has designed for this project a version within the DOGA 317 series with various customizations such as high protection, torque / speed curve and output shaft in order to optimize the operation of the Azurit. It is for this reason why we are proud to be part of this project and the award given during the Agritechnica 2017, as Machine of the year 2018
Due to the fact that Caterpillar projects are becoming more complex, there is a greater need for a safer environment for the cab/machine operator.
DOGA closely monitors the requirements to provide a safer environment for equipment operators in the construction field, as is the case with the ADT model. This machine is an articulated dump truck that provides great comfort which contributes to increased operator productivity.
DOGA supplies three windshield wiper systems on the ADT – one front and two rear – plus a washer system.
The front windshield wiper system utilizes an electronic 319 motor, a 800 mm wiper arm (type 120.9) and a 550 mm wiper blade (type 133). The rear systems consist of a 315 motor, a 340 mm wiper arm (type 120.65), and a 330 mm wiper blade (type 134). The washer tank is 5.8L.
The estimated annual production is 3,500 units.
MORE THAN 15 YEARS OF ELECTRONIC MOTORS
DOGA has accumulated vast knowledge and experience concerning development and production of electronic motors, as dedication to this product started more than 15 years ago.
It all started by developing an external electronic module, made for motors for windshield wiper systems. In the following years the motors have undergone continuous evolution, up to development of a motor with integrated electronics. Thanks to the electronics, the motor is now capable of speed control, position control, and control of direction of rotation. In parallel certain features of the electronics have undergone evolution as well, which allow DOGA to offer a wider product range of motors with voltages 12V and 24V, and with a variety of interfaces for communication with the vehicle (CAN J1939, CANOpen, LIN and Digital Inputs); DOGA is now in a position to cover a wide range of customers’ requirements.
Development has not been limited only to external and integrated controller for DOGA motors, but includes electronic hall sensors and EMC filters for conventional motors.
“THE SEED IS THE BEGINNING OF EVERYTHING”
Germipasto is a pioneer producer of planting seeds.
It is also the company responsible for manufacturing the LD TEC, a very high precision seeder model, which achieves an excellent distribution of the product, so that the planting is carried out in a accurate way without wasting time or money. In addition, it allows and enables the coupling of the machine in front of the tractor.
With regard to DOGA, we have been in charge of providing the three DC motors installed in the seeder. Each of them performs a specific function carrying out the machine's tasks.
The motors included are; a 321 used to rotate the seed drill disc; a 162 in charge of shaking the disc, and a 315 whose function is to open the gate so that the seeds falls down on the ground.
BECAUSE IT’S IN THE GROUND WHERE EVERYTHING BEGINS AND THE SEED IS THE BEGINNING OF EVERYTHING.